Puslespilsfremstillingsproces

There are various ways of cutting the joint lines of the puzzle pieces. Mainstream puzzles use a zero-piece edge style called "fully interlocking". "Comprehensive interlocking" is to connect several adjacent pieces together. If one of them is moved horizontally, all the connected pieces will slide in the same direction and will not be separated. Sometimes, the pieces are so tightly assembled that the whole piece will not fall apart when picked up.

Nærbillede- af sammenføjningen af ​​puslespilsbrikker

The interlocking of the pieces is usually achieved by the protrusions and depressions on the edges of the pieces, and this splicing method is similar to the "tenon and mortise joint" in furniture production. The main body of the piece is a rectangle with the same size and form. Assuming that the two pieces that are closely connected to the left and right are respectively A and B, if the right edge of piece A has a protrusion A extending to the right, then the left edge of piece B must have a shape similar to that of piece B. A matches the depression B, and in order to make A and B lock each other, the end of the protrusion A is required to be wider than the end connected to the edge of the nail plate. This kind of protrusion in the form of a wide front and a narrow back is called a dovetail in traditional woodworking. We might as well call the protrusions and depressions of the puzzle pieces "tenons" and "eyes". However, if the dovetail tenon with the tip is made on the cardboard, it is easy to layer and damage the parts, so the tenon and the mortise in the puzzle are mostly round.

In some jigsaw puzzles (probably the most common one), all the pieces have the same shape, each piece has two mortise and tenon which are axially symmetrical, and the axes of the tenon and mortise are crossed.卄" glyph. In this way, zero slices and zero slices are always criss-crossed. In some puzzles, the tenon and tenon structure of each piece is different from each other, but usually the main body of each piece is also quadrilateral, with a tenon or mortise on each of the four sides.

Non-interlocking puzzles are generally divided into pieces by intersecting curves of various forms, and the edge of the piece is also a section of the curve. In fact, the puzzle of this mode is relatively simple, because the matching between zero pieces and zero pieces is mostly fixed, and it is easy to find adjacent zero pieces according to the curve shape of the edge. It's just that players are required to be calm when assembling such a puzzle, otherwise it is easy to mess up the part that has been assembled if they miss.

Sammenlåsende puslespil med nul brikker af samme form anses for at være de sværeste at samle, især dem med blødere farver og mindre mønsterkontrast, fordi der ofte kun er meget subtile forskelle mellem brikkerne.

Ind imellem vil der være nogle puslespil med meget mærkelige layouts, som kan bringe mere sjov til spillerne.

Det overordnede billede af puslespillet er det mest almindelige, og billedets kant er enten en lige linje eller en almindelig dekorativ kurve. I denne type puslespil er der altid nogle brikker, som enten mangler en tap og tap på den ene side eller har en ret vinkel. Spillere kan nemt placere rammen ud, så de starter ofte fra hjørnerne, når de samles. Selvfølgelig er der også nogle gåder, der bevidst gør hjørnebrikkerne til en tapp for at gøre spillet mere udfordrende. Der er også nogle mere barnlige ideer, der gør omridset af hele puslespillet til små dyr eller andre søde former. Fordi konturlinjerne er mere snoede og lange, er der mange flere brikker på kanten end firkantede puslespil, og det er nemmere at sætte sammen. Denne type puslespil er naturligvis mere velegnet til unge spillere.

I de senere år er computer- og computerstyret-laser- og hydraulisk skæreudstyr også blevet brugt i design og produktion af puslespil. Anvendelsen af ​​nye teknologier har gjort puslespillets sammenlåsningsmekanisme og delstile mere sofistikerede, og nye mønstre dukker op efter hinanden.